纵轴式掘进机截割臂升降运动的仿真分析

浏览次数:收录时间:2020-11-21 21:22
【内容提要】[1] 宗凯,张鹏,王鹏江,等.固定截割方向截割臂摆角垂直跳动规律[J].煤炭学报,2018,43(5):1455-1463.ZONG Kai, ZHANG Peng, WANG Pengjiang, et al. Regulation of the Cutting Arm's Swing Angle Run-out Perpendicular to the Fixed Cutting Directi

[1]   宗凯,张鹏,王鹏江,等.固定截割方向截割臂摆角垂直跳动规律[J].煤炭学报,2018,43(5):1455-1463.ZONG Kai, ZHANG Peng, WANG Pengjiang, et al. Regulation of the Cutting Arm's Swing Angle Run-out Perpendicular to the Fixed Cutting Direction [J]. Journal of China Coal Society, 2018,43(5):1455-1463.  
[2]   田劼,王苏彧,吴淼,等.悬臂式掘进机空间位姿的运动学模型与仿真[J].煤炭学报,2015,40(11):2617-2622.TIAN Jie, WANG Suyu, WU Miao, et al. Spatial Pose Kinematics Model and Simulation of Boom-type Roadheader [J]. Journal of China Coal Society, 2015,40(11):2617-2622.  
[3]   YANG Yang, LI Guowei, YUAN Aihui. Performance Analysis of a Hybrid Power System for Roadheader [J]. Mathem-atical Problems in Engineering, 2017,16(1):1-12.  
[4]   魏晓华,师建国.纵轴式掘进机截割过程动力学建模与仿真[J].辽宁工程技术大学学报:自然科学版,2013,36(1):89-92.WEI Xiaohua, SHI Jianguo. Dynamic Modeling and Simu-lation of Cutting Process for Longitudinal Roadheaders [J]. Journal of Liaoning Technical University: Natural Science, 2013,36(1):89-92.  
[5]   张林锋.超重型岩巷掘进机截割头动载荷识别方法的研究[D].太原:太原理工大学,2019.ZHANG Linfeng. Research on Recognition Methed of Cutting Head Dynamic Load of the Super-heavy Rock Roadheader [D]. Taiyuan: Taiyuan University of Tech-nology, 2019.  
[6]   宗凯,符世琛,李一鸣,等.截割头载荷对掘进机机身偏向角的影响规律分析[J].工矿自动化,2018,44(8):46-51.ZONG Kai, FU Shichen, LI Yiming, et al. Analysis of Influence Regularity of Cutting Head Load to Roadheader's Deviation Angle [J]. Industry and Mine Automation, 2018,44(8):46-51.  
[7]   汪胜陆,孟国营,赵立新,等.悬臂式掘进机截割头垂直摆动控制仿真[J].煤炭科学技术,2009,37(5):95-98.WANG Shenglu, MENG Guoying, ZHAO Lixin, et al. Simulation on Vertical Moving Control of Cutting Head for Boom Type Mine Roadheader [J]. Coal Science and Technology, 2009,37(5):95-98.  
[8]   毛清华,陈磊,闫昱州,等.煤矿悬臂式掘进机截割头位置精确控制方法[J].煤炭学报,2017,42(S2):562-567.MAO Qinghua, CHEN Lei, YAN Yuzhou, et al. Precise Control Method of Cutting Head Position for Boom-type Roadheader in Coal Mine [J]. Journal of China Coal Society, 2017,42(S2):562-567.  
[9]   李阁强,牛彦杰,陈馈,等.基于BP-PID控制器的盾构液压推进控制系统研究[J].隧道建设,2017,37(7):885-890.LI Geqiang, NIU Yanjie, CHEN Kui, et al. Research on Hydraulic Thrusting Control System of Shield Machine Based on BP-PID Controller [J]. Tunnel Construction, 2017,37(7):885-890.  
[10]   刘春生,漆利平,赵汗青.悬臂式掘进机悬臂水平摆动机构的建模与仿真[J].黑龙江科技学院学报,2008,18(1):1-4.LIU Chunsheng, QI Liping, ZHAO Hanqing. Organization Modeling and Simulation of Boom Type Roadheader's Horizontal Hunting [J]. Journal of Heilongjiang Institute of Science & Technology, 2008,18(1):1-4.  
[11]   方桂花,卢进南,陈良武.负载敏感在掘进机升降液压回路中的应用[J].煤炭科学技术,2010,38(9):94-95,111.FANG Guihua, LU Jinnan, CHEN Liangwu. Application of Loading Sensitivity to Up and Down Hydraulic Circuit of Mine Roadheader [J]. Coal Science and Technology, 2010,38(9):94-95,111.  
[12]   白国伟,丁维星,贾传震.掘进机摇臂升降液压系统性能分析及优化[J].液压与气动,2016,(9):82-86.BAI Guowei, DING Weixing, JIA Chuanzhen. Perfor-mance Analysis and Optimization of Hydraulic System Rocker Arm Lift for Roadheader [J]. Chinese Hydraulics & Pneumatics, 2016,(9):82-86.  
[13]   赵美卿,张立仁,赵彤涌.基于AMESim的掘进机用平衡阀动态特性分析[J].液压与气动,2015,(7):51-54.ZHAO Meiqing, ZHANG Liren, ZHAO Tongyong. Working Properties of Counterbalance Valve in Roadheader Based on AMESim [J]. Chinese Hydraulics & Pneumatics, 2015,(7):51-54.  
[14]   杨文林,闫炳雷,王忠宾.基于AMESim的掘进机液压系统参数优化分析[J].机床与液压,2014,42(5):129-131.YANG Wenlin, YAN Binglei, WANG Zhongbin. Para-meter Optimization for Hydraulic System of Roadheader Based on AMESim [J]. Machine Tool & Hydraulics, 2014,42(5):129-131.  
[15]   李旭,王苏彧,吉晓东,等.EBZ160型掘进机驱动油缸实测载荷分析[J].煤炭技术,2016,35(5):250-252.LI Xu, WANG Suyu, JI Xiaodong, et al. Load Analysis of Driving Cylinder for EBZ160 Roadheader Based on Measured Data [J]. Coal Technology, 2016,35(5):250-252.  




回到顶部