Vibration characteristics of TBM supporting

浏览次数:收录时间:2020-09-15 21:48
【内容提要】[1] 刘统,龚国芳,彭左,等. 基于液压变压器的TBM刀盘混合驱动系统[J]. 浙江大学学报:工学版,2016,50(3):419-427. LIU Tong, GONG Guo-fang, PENG Zuo, et al. Hybrid cuttehead driving system for TBM based on hydraulic transformer[J]. Journal of Zhej

[1] 刘统,龚国芳,彭左,等. 基于液压变压器的TBM刀盘混合驱动系统[J]. 浙江大学学报:工学版,2016,50(3):419-427. LIU Tong, GONG Guo-fang, PENG Zuo, et al. Hybrid cuttehead driving system for TBM based on hydraulic transformer[J]. Journal of Zhejiang University:Engineering Science, 2016, 50(3):419-427.
[2] CHO S H, KIM J, WON J, et al. Effects of jack force and construction steps on the change of lining stresses in a TBM tunnel[J]. KSCE Journal of Civil Engineering, 2017, 21(4):1-12.
[3] 韩美东,曲传咏,蔡宗熙,等. TBM刀盘掘进过程动态仿真[J]. 哈尔滨工程大学学报,2015,36(8):1098-1102. HAN Hei-dong, QU Chuan-yong, CAI Zong-xi, et al.Dynamic numerical simulation of tunneling by the TBM cutter head[J]. Journal of Harbin Engineering University, 2015, 36(8):1098-1102.
[4] 李献,邹晓阳,徐海,等. 硬岩掘进机的动力吸振方案优化研究[J]. 噪声与振动控制,2015,35(3):189-194. LI Xian, ZOU Xiao-yang, Xu Hai, et al.Optimization of dynamic absorbers of tunnel boring machines[J]. Noise and Vibration Control, 2015, 35(3):189-194.
[5] FESTA D, BROERE W, BOSCH J W. An investigation into the forces acting on a TBM during driving-Mining the TBM logged data[J]. Tunnelling and Underground Space Technology, 2012, 32:143-157.
[6] 凌静秀,孙伟,霍军周,等. TBM刀盘系统多自由度耦合固有特性及敏感度[J]. 东北大学学报:自然科学版,2015,37(4):546-550. LING Jing-xiu, SUN Wei, HUO Jun-zhou, et al.Natural characteristics and sensitivity of TBM cutterhead system with multi-degree-of-freedom coupling[J]. Journal of Northeastern University:Nantural Science, 2015, 37(4):546-550.
[7] SUN W, DING X, WEI J, et al. Hierarchical modeling method and dynamic characteristics of cutter head driving system in tunneling boring machine[J]. Tunnelling and Underground Space Technology, 2016, 52:99-110.
[8] HASSANPOUR J, ROSTAMI J, ZHAO J. A new hard rock TBM performance prediction model for project planning[J]. Tunnelling and Underground Space Technology, 2011, 26(5):595-603.
[9] 谢启江,余海东. 硬岩掘进机刀盘载荷与撑靴接触界面刚度的耦合关系[J]. 上海交通大学学报,2015, 49(9), 1269-1275. XIE Qi-jiang, YU Hai-dong. Coupling ralationship between loads on cutterhead of tunnel boring machine and contact stiffness of gripper shoes and rocks[J]. Journal of Shanghai Jiaotong University, 2015, 49(9), 1269-1275.
[10] 余海东,郝培,赵勇,等. 硬岩掘进装备支撑系统界面接触刚度非线性特性[J]. 机械工程学报,2014,50(21):54-59. YU Hai-dong, HAO Pei, ZHAO Yong, et al.Non-linear behavior of normal contact stiffness of tunnel surface and supporting system of tunnel boring machines[J]. Journal of Mechanical Engineering, 2014, 50(21):54-59.
[11] 陈於学,王冠兵,杨曙年. 圆柱滚子轴承的动态刚度分析[J]. 轴承,2008,(4):1-5. CHEN Yu-xue, WANG Guan-bing, YANG Shu-nian. Analysis of dynamic stiffness of cylindrical roller bearings[J]. Bearing, 2008, (4):1-5.
[12] GAO S H, MENG G, LONG X H. Study of milling stability with Hertz contact stiffness of ball bearings[J]. Archive of Applied Mechanics, 2011, 81(8):1141-1151.
[13] 王林鸿,吴波,杜润,等.液压缸运动的非线性动态特征[J]. 机械工程学报,2007,43(12):12-19. WANG Lin-hong, WU Bo, DU Run, et al. Nonlinear dynamic characteristics of moving hydraulic cylinder[J]. Journal of Mechanical Engineering, 2007, 43(12):12-19.
[14] PARK Y, LEE H, PARK K, et al. Practical behavior of advanced non-linear hydraulic servo system model for a mold oscillating mechanism depending on line volume[J]. Journal of Mechanical Science and Technology, 2016, 30(3):975-982.
[15] 彭欢,张怀亮,邹伟,等. 硬岩掘进机推进液压缸结构参数优化[J]. 机械工程学报,2014,50(21):76-83. PENG Huan, ZHANG Huai-liang, ZOU Wei, et al.Structure parameters optimization of thrust hydraulic cylinder under foundation vibration[J]. Journal of Mechanical Engineering, 2014, 50(21):76-83.




回到顶部